GROUNDMASTER 7200 7210

Introducing the new zero-radius turn rotary mowers
rugged enough to be called Groundsmasters. These
new machines have powerful Kubota® 28 hp (21 kW)
or 35 hp (26 kW) 3-cylinder liquid-cooled diesel
engines to get the job done. Heavy-duty
7-gauge welded deck construction, the
industry’s toughest spindle assembly, and
shaft-driven cutting decks make these
Groundsmasters hard to beat. 


GROUNDSMASTER 7200 GROUNDSMASTER 7210
ENGINE
Kubota®, 3-cylinder, liquid-cooled diesel, 28 bhp (21 kW), 25 hp
net @ 2725 rpm, 51 ft-lb. torque @ 2100 rpm. High idle 3200
rpm (uninstalled), low idle 1600 rpm, displacement 1123cc.
Remote mounted Donaldson® air filter, external spin-on oil filter
and high flow fixed fan.
Kubota®, 3-cylinder, liquid-cooled diesel turbo, 35 bhp (26 kW),
31.5 hp net @ 3000 rpm, 63 ft-lb. torque @ 2000 rpm. High
idle 3220 rpm (uninstalled), low idle 1350 rpm, displacement
1123cc. Remote mounted Donaldson® air filter, external spin-on
oil filter and high flow fixed fan.
Radiator Rear mounted, 8 fins/inch, 3 rows.
Fuel Capacity 11.5 gallons (43.5 liters), diesel. 2008 models Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petrol blend).
Engine Oil w/ Filter 3.9 quarts (3.69 liter).
Hydraulic Oil 3.5 gallons (13.25 liter).
Transmission
Transmission directly mounted to engine via bell housing, two independent closed-loop circuits. One pump/motor controlling left
side forward, neutral, and reverse, and one pump/motor controlling right side forward, neutral, and reverse. Pumps are variable
displacement piston type with slippers and full stroke capacity of 18cc/rev.
Wheel Drive Independent high-torque, low-speed wheel motors with 310cc displacement.
PTO Clutch Hydraulically actuated wet multi-disc clutch.
Steering Control Adjustable twin sticks with high performance KYB® hydraulic dampers. Rev/N/Forward, located on sides of operator.
Ground Speed
(Mowing configuration ) Forward 0-12.5 mph (0-20 km/h), variable. Reverse 0-8.5 mph (0-13.7 km/h), variable.
Alternator /Generator 12-volt, 40 amp internal regulated charging @ 3150 rpm.
Battery BCI Group No.: 26, 540 cold cranking amps @ 0° F.
Instrumentation Hour meter, glow indicator, high temp indicator, oil pressure indicator, alternator indicator.
Safety Logic Controls Toro Standard SCM.
Interlocks
Tractor neutral, operator presence (engine shuts down if operator is not in seat and traction sticks are moved to the operation
position), parking brake, PTO on, auxiliary hydraulics on, high temp (PTO shuts down but engine still running), over temp (engine
shuts down).
Service Brake Twin levers with dynamic braking through hydrostatic transmission.
Parking Brake Hand actuated brake lever with two 10.25" diameter disc brakes mounted on the rear wheel motors.
Drive Tires 24 x12-12, 6-ply pneumatic tubeless, demountable and interchangeable. Tread “Toro Tuff Trac”.
Front Castor Tires 4-ply ribbed tread, tubeless 15 x 6-6, 20-22 psi.
ROPS Two-post foldable style ROPS certified per OSHA 1928.52 specification.
Seat Two piece, high back cushion seat with drain hole, deluxe low profile suspension, adjustable for operator weight, seat back angle,
seat fore/aft position, lumbar support and armrest height, retractable seat belt.
Storage Built-in cup holder, and personal storage reached from seat. Storage for raingear, tools, etc.
Ignition Off/run/start, located right of operator.
Throttle Low - high idle, located right of operator.
Parking Brake Off - on spring applied on, located right of operator.
Deck Hydraulic Lift Raise/hold/lower/float, located on right of operator. Hand lever or foot pedal operation (2008 and up models).
Rear Hydraulic Lift
(optional) Raise/hold/lower/float. Electric switch right side of operator. Remote hydraulics selector switch, located on right console.
Curb Climbing Capable of climbing 8" curbs.
Tie Downs Four loops, one located on each corner of the machine.
Certification Cutting unit meets specification of American National Standard ANSI B71.4-2004, Safety Specifications for commercial turf care
equipment. Cutting units sold in EU meets specifications of European standard per CE Machinery Directory EN836.
Warranty 2-year limited warranty. Refer to the Operator’s Manual for further details.